Rustoleum™ Precision Line Inverted Marking Paint (20oz.) - 12 Count

Rust-Oleum Industrial Choice® M1600 System Precision Line Inverted Marking Paint Spray (17 oz.) – 12 Count

Create ultra-crisp, long-lasting marks on concrete, pavement, grass, gravel, dirt, and other surfaces. This water-based formula creates accurate markings in bright, durable colors. Suitable for marking the location of underground utilities at construction and excavation sites where identification is desired. Features a precision-line spray tip for easy to read markings with virtually no overspray. Marks more linear feet than any other brand; making your marks go farther and your cost lower. Paint can be applied down to 25° F and dries in less than 5 minutes.

Features:

• Use for marking surfaces including concrete, brick, blacktop, gravel, soil, and grass.
• Designed to spray upside-down with a precision tip that minimizes overspray.
• Dries to the touch in 5 minutes.
• Provides bright markings with a flat sheen for superior clarity.
• Durable formula resists early fading and chalking.
• Non-clogging, locking spray tip won’t pop off.
• Can be sprayed in the cold (to 25°F)
• Apply using a marking pistol or marking wand (84-789).

Specifications:

• Size: 20 fl. oz. aerosol container (17 oz. fill)
• Coverage: 600 to 700 linear ft. at 1 inch wide
• Container type: aerosol
• Shelf life: 5 years

Application:

Remove loose contaminants by sweeping the surface before application of the coating. Use when temperature is 40-90°F (10-32°C) and humidity is below 85% to ensure proper drying. This product can be used down to 25°F (-4°C) which may result in a slight reduction of delivery rate. Protect surrounding surfaces from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute after mixing ball is heard. Invert can and point at ground or floor. Hold can 4 to 10 inches above surface to be marked. Press in sideways to spray. If valve clogs, carefully remove spray tip and clean in thinner. DO NOT insert any object into can valve opening.

APWA Marking Colors:

The American Public Works Association, a non-profit professional association, created a uniform color code for utility companies, both public and private. The colors have become the marking standard across all industries.

APWA Uniform Color Code

Color	Utility Line
White	Proposed Excavation
Pink	Temporary Survey Markings
Red	Electrical Power Lines, Cables, Conduit and Lighting Cables
Yellow	Gas, Oil. Steam, Petroleum or Gasoline Materials
Orange	Communication, Alarm or Signal Lines, Cables or Conduit
Blue	Potable Water
Purple	Reclaimed Water, Irrigation & Slurry Lines
Green	Sewer and Drain Lines

Marking Flags, Tape and Paint