Premium Textured Rubber Speed Hump

Premium Textured Rubber Speed Hump

This Premium Textured Speed Hump is used to slow down traffic in a gentle manner. Designed to reduce noise and discomfort for the driver, when compared to rubber speed bumps and asphalt or concrete speed humps. Suitable for use in parking lots, roadways, and private lanes. Sold in modular sections, so you can configure to fit any space.

Features:

• Use for speeds 15 mph or less in heavy traffic areas.
• Quieter and more comfortable to drive over (compared to speed bumps).
• Textured, non-slip surface improves traction.
• Durable vulcanized rubber won’t chip, crack or crumble.
• Embedded yellow rubber striping for visibility.
• Yellow is made from long lasting EPDM rubber and will not fade or crack in any weather condition.
• Join multiple middle sections together to create length needed; finish with end caps.
• Longer lasting and more cost efficient than concrete or asphalt alternatives.
• Easily installed, removed, relocated, and stored without damage.
• Installs on asphalt or concrete; flexible rubber conforms to surface contours.

Options:

• Textured speed hump sold in sections.
• End caps sold separately.

Caution:

• Not designed for speeds over 15 mph.
• Sweepers must raise brushes before driving over speed humps.
• Remove speed humps for road maintenance or snow plowing.

Installation:

Use both adhesive and hardware for installation of speed humps. Hardware sold separately. See installation instructions below.

Asphalt Installation:

• Each middle section requires six 14" x 1/2" rebar spikes and 5/8" washers. Use 6 ea. part XASPHALT per section (sold separately).
• Each end cap section requires three 14" x 1/2" rebar spikes and 5/8" washers. Use 3 ea. part XASPHALT per section (sold separately).

Concrete Installation:

• Each middle section requires six 4 1/2" lag bolts, 2" lag shields, and 1/2" washers. Use 6 ea. part XCONCRETE per section (sold separately).
• Each end cap section requires three 4 1/2" lag bolts, 2" lag shields, and 1/2" washers. Use 3 ea. part XCONCRETE per section (sold separately).

Adhesive Installation:

Use 10 ounces of construction grade adhesive per middle piece (adhesive sold separately; available locally). 2-Tube epoxy (such as Simpson ET-22) dries hard, while urethane (such as PL premium polyurethane) remains flexible. Use whichever product is appropriate for your application.

Specifications:

Resources:

Rubber Speed Bump and Hump Comparison:

Description	Premium 6' Textured Rubber Speed Bump	Low Profile Speed Bump	Standard 6' Rubber Speed Bump	Premium Textured Speed Hump
Item Number	PAB-SP	SB72-2H	SB72N	PAH-SP
Height	2"	2"	2.5"	2"
Length x Width (nominal)	72" L x 12" W	72" L x 12" W	72" L x 12" W	19" L 35" W
Material	Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature.	Molded using crumb rubber from recycled tires ♲	Molded using crumb rubber from recycled tires ♲	Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature.
Application	Alleys and Low Speed Roadways - Holds up in heavy traffic (<20 mph)	Alley and Low Speed Roadways	Best for Parking Lots - Can also be used on Low Speed Roadways	Heavy traffic & low speed roadways
Effect	Slows traffic to less than 5 mph	Slows traffic 1-5 mph	Slows traffic the most - 2-5 mph	Gentler than speed bumps
Yellow Strips	5 (non-wearing, molded-in, synthetic rubber)	3 (molded-in reflective tape)	3 (molded-in tape)	6 (non-wearing, molded-in, synthetic rubber)
Cat Eye Nighttime Reflectors	8 (included)	8 (optional)	8 (optional)	None
Speed bump weight (without end caps)	52 lbs.	40 lbs.	52 lbs.	38 lbs.
End cap weight	3.5 lbs.	3.5 lbs.	3.5 lbs.	14 lbs.
Installation holes (without end caps)	4	4	4	6
Installation holes (endcaps)	2	2	2	3
Installation holes (endcaps)	2	2	2	3
Cut with utility knife	No	Yes	Yes	No
Made in the USA	No	Yes	Yes	No

More Speed Bumps and Humps