Lighted Bollard Covers give storefronts, parking lots, campuses, and walking paths a clean look and provide a well-lit, guided path. Hardwired Lighted Bollard Covers draw 5 watts of power each and can be wired in a circuit up to 200 lights. Bollard cover styles come with installation tape, ensuring a quick and easy fit.
Features:
Maintenance free product – reduces costs and labor by eliminating the need to paint.
On/Off switch for better user experience.
Fits over 6” pipe.
Made with 1/4" low density polyethylene plastic for impact and corrosion resistance.
Light time on full charge: 12-20 hours
Made in the USA.
Two Light Choices:
Besides the installation process, the difference is the light casing. The hardwired option features a dome top with frosted light glass, while the UV powered option features a flat top and clear acrylic light glass. More comparison points (please choose style and color carefully, as no returns accepted on this item):
Hardwired Bollard Covers:
UV Solar Bollard Covers:
Hardwired Bollard Covers:
Dome top with frosted glass
Flat top with clear acrylic glass
40,000 Average Life Hours
175,000 Average Life Hours
UV Solar Bollard Covers:
200 Lights can be hardwired to the same circuit
Charges from the sun’s ultraviolet rays, even on cloudy days
Installation by certified electrician required
Quick and easy installation
Options and Sizing:
To be sure of the right fit measure the circumference (distance around) of the post you wish to cover. Take that dimension and divide it by pi (3.14), Example: Circumference is 21". Divide by 3.14. Pipe size is 6.625". Thus, the bollard cover size you need is 6".
Colors: black (Pantone 6C), brown (Pantone PQ-440C), gray (Pantone 11C), and green (Pantone 343C).
Specifications:
Material: low density polyethylene plastic
Hardwired light cover: dome top with frosted glass
UV light cover: flat top with clear acrylic glass
Wall thickness: 1/4"
Height: 58" overall, fits maximum 51" pipe (can be cut to custom height, call for quote)
Weight: 28 lbs.
Includes: Each cover comes with two NiMh rechargeable AA Batteries
UV Cover Installation:
Apply the neoprene tape around the circumference of the steel bollard 3" down from the top of the post and 3" up from the bottom of the post. Once the tape is applied, slide the bollard cover over, eliciting the sound of air squeezing out between the post and sleeve as it creates a vacuum seal. If these directions are followed correctly, the bollard cover should fit tight with no gaps.
Hardwired Cover Installation:
The Hardwired Lighted Bollard Cover draws 5 watts of power (120 volts) and requires a professional electrician to install.