6’ Standard Rubber Speed Bump-trafficsafetywarehouse.com

6’ Standard Rubber Speed Bump

Protect pedestrians, reduce vehicle speeds, and slow traffic with this sturdy 6’ speed bump. Recycled rubber construction won’t chip, crack or crumble. Model has a channeled bottom for drainage. Recommended for parking lots, business entrances, apartment complexes, and residential roads.

Features:

For use in low traffic areas going 5 mph or less.
Aggressive 2.5” High bump slows traffic 1-5 mph.
Recycled rubber won’t chip, crack or crumble.
Resistant to weather, oil, salt, and moisture.
Protected from UV light.
Molded-in, reflective yellow tape stripes.
Flexible rubber conforms to surface contours.
Dual bottom channels for drainage or to protect wire, hose, or pipe.
Installs on asphalt or concrete.
Join multiple middle sections together to create length needed; finish with end caps.
Can be cut to size with a utility knife.
Weight bearing capacity of 44,000 lbs. per axle.
Made in the USA.

Options:

Concrete or asphalt installation hardware available (sold separately, and in a kit). Use 10 ounce of epoxy or construction adhesive (i.e., Polyurethane PL Premium) for installations where no hardware is allowed.
Available as a kit with hardware and end caps.
Optional End Caps (sold separately, and in a kit).
Speed Bump also available in a gentler Low Profile (2” High) option.

Specifications:

Overall dimensions (without end caps)	72” L x 12” W x 2.5” H
Stripes	3 yellow
Installation holes	4
Speed bump weight (without end caps)	52 lbs.
End cap weight	3.5 lbs.
End cap dimensions	7" L x 12" W x 2.5" H
End cap installation holes	2

Warranty:

The Plasticade family of plastic products have a 30-day limited warranty and rubber products have a 1-year limited warranty. For products with both plastic and rubber components, each component is warrantied separately based on material. Warranty covers manufacturer defects only. Damage caused by improper installation, use, or care is the responsibility of the user. This warranty does not include replacement for normal wear and tear. This warranty does not extend to any non-plastic or rubber components that may be part of the products. If a product fails during normal use within the warranty period due to a manufacturer defect, the manufacturer will replace at no charge.

Resources:

6’ Speed Bump Specifications
Speed Bump Installation Instructions
Speed Bumps, Speed Humps & Car Stops Flyer

Rubber Speed Bump and Hump Comparison:


Description	Premium 6' Textured Rubber Speed Bump	Low Profile Speed Bump	Standard 6' Rubber Speed Bump	Premium Textured Speed Hump
Item Number	PAB-SP	SB72-2H	SB72N	PAH-SP
Height	2"	2"	2.5"	2"
Length x Width (nominal)	72" L x 12" W	72" L x 12" W	72" L x 12" W	19" L X 35" W
Material	Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature.	Molded using crumb rubber from recycled tires ♲	Molded using crumb rubber from recycled tires ♲	Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature.

Application	Alleys and Low Speed Roadways - Holds up in heavy traffic (<20 mph)	Alley and Low Speed Roadways	Best for Parking Lots - Can also be used on Low Speed Roadways	Heavy traffic & low speed roadways
Effect	Slows traffic to less than 5 mph	Slows traffic 1-5 mph	Slows traffic the most - 2-5 mph	Gentler than speed bumps
Yellow Strips	5 (non-wearing, molded-in, synthetic rubber)	3 (molded-in reflective tape)	3 (molded-in tape)	6 (non-wearing, molded-in, synthetic rubber)
Cat Eye Nighttime Reflectors	8 (included)	8 (optional)	8 (optional)	None
Speed bump weight (without end caps)	52 lbs.	40 lbs.	52 lbs.	38 lbs.
End cap weight	3.5 lbs.	3.5 lbs.	3.5 lbs.	14 lbs.
Installation holes (without end caps)	4	4	4	6
Installation holes (endcaps)	2	2	2	3
Installation holes (endcaps)	2	2	2	3
Cut with utility knife	No	Yes	Yes	No
Made in the USA	No	Yes	Yes	No