6 Premium Textured Rubber Speed Bump
These textured speed bumps with built in reflectors are constructed from durable, vulcanized rubber. Designed to reduce and control the speed of vehicles in parking lots, roadways, and private lanes. The embedded reflectors and glass elements add extra visibility at night. The modular design of the speed bump allows for easy installation, with the rubber base providing a firm grip to the surface. They are moisture-resistant, temperature-resistant, resistant to oil, salt, and UV light. Ideal for heavy traffic areas on low-speed roadways; slows traffic to less than 5 mph.
Features:
- For use in low traffic areas going 20 mph or less.
- 2 High bump slows traffic to less than 5 mph.
- Durable vulcanized rubber wont chip, crack or crumble.
- Resistant to weather, oil, salt, and moisture.
- Textured surface helps traction.
- Molded-in reflective yellow rubber striping for visibility. Yellow is made from long lasting EPDM rubber and will not fade or crack in any weather condition.
- Flexible rubber conforms to surface contours.
- Bottom channels for drainage or to protect wire, hose, or pipe.
- Join multiple middle sections together to create length needed; finish with end caps.
- Installs on asphalt or concrete.
- Conforms to surface contours.
- Weight bearing capacity of 44,000 lbs.
- Also available in a shorter
4 Premium Textured Rubber Speed Bump.
Specifications:
Overall dimensions | 72 L x 12 W x 2 H |
Stripes | 5 yellow |
Material | vulcanized SBR rubber (60% recycled) and yellow EPDM rubber |
Installation holes | 4 |
Nighttime reflective cat eyes | 8 |
Speed bump weight (without end caps) | 52 lbs. |
End cap weight | 3.5 lbs. |
End cap dimensions | 6" L x 12" W x 2" H |
End cap installation holes | 1 |
Hardware (Sold Separately):
- Requires 4 asphalt spikes or concrete bolts per middle part.
- Requires 1 asphalt spike or concrete bolt per end cap.
- Installation in asphalt requires asphalt spikes (part number
XASPHALT)
- Installation in concrete requires concrete bolts (part number
XCONCRETE)
Resources:
Speed Bump Installation Instructions
Speed Bumps, Speed Humps & Car Stops Flyer
Rubber Speed Bump and Hump Comparison:
|
|
|
|
|
Description
|
Premium 6' Textured Rubber Speed Bump
|
Low Profile Speed Bump
|
Standard 6' Rubber Speed Bump
|
Premium Textured Speed Hump
|
Item Number
|
PAB-SP
|
SB72-2H
|
SB72N
|
PAH-SP
|
Height |
2" |
2" |
2.5" |
2" |
Length x Width (nominal) |
72" L x 12" W |
72" L x 12" W |
72" L x 12" W |
19" L 35" W |
Material |
Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature. |
Molded using crumb rubber from recycled tires ♲ |
Molded using crumb rubber from recycled tires ♲ |
Vulcanized Rubber (textured, shiny surface). Best in terms of resistance to aging, abrasion, and temperature. |
|
|
|
|
|
Application |
Alleys and Low Speed Roadways - Holds up in heavy traffic (<20 mph) |
Alley and Low Speed Roadways |
Best for Parking Lots - Can also be used on Low Speed Roadways |
Heavy traffic & low speed roadways |
Effect |
Slows traffic to less than 5 mph |
Slows traffic 1-5 mph |
Slows traffic the most - 2-5 mph |
Gentler than speed bumps |
Yellow Strips |
5 (non-wearing, molded-in, synthetic rubber) |
3 (molded-in reflective tape) |
3 (molded-in tape) |
6 (non-wearing, molded-in, synthetic rubber) |
Cat Eye Nighttime Reflectors |
8 (included) |
8 (optional) |
8 (optional) |
None |
Speed bump weight (without end caps) |
52 lbs. |
40 lbs. |
52 lbs. |
38 lbs. |
End cap weight |
3.5 lbs. |
3.5 lbs. |
3.5 lbs. |
14 lbs. |
Installation holes (without end caps) |
4 |
4 |
4 |
6 |
Installation holes (endcaps) |
2 |
2 |
2 |
3 |
Installation holes (endcaps) |
2 |
2 |
2 |
3 |
Cut with utility knife |
No |
Yes |
Yes |
No |
Made in the USA |
No |
Yes |
Yes |
No |
More Speed Bumps and Humps